Intersec Saudi Arabia

Visit us! From 1 to 3 October 2024 in Riyadh (Saudi Arabia) – Hall 4 / Stand C40

CPS - midiControl plus (MD)

Preconfigured central power supply system

MIDICONTROL PLUS – THE SIMPLE CENTRAL POWER SUPPLY SYSTEMS ENTRY

midiControl plus is a preconfigured central power supply system with single luminaire monitoring without additional wiring, free programmable circuits and a 5-year log book for connecting emergency and security luminaires with LED, fluorescent or halogen lamps. Available either with one or two chargers to 2.5A each. The biggest version equipped with 55 Ah batteries, outputs of 5300 W for 1 hour, 2300 W for 3 hours or 1000 W for 8 hours.

The circuit module supplies all connected luminaires to the system with electricity. Each outlet can be programmed for circuit monitored systems and for single luminaire monitoring. A combined operation is also possible. The midiControl plus can hold up to 16 circuit modules of types DCM42 for up to 32 current circuits.

Each module is designed for 2 output circuits, each with up to 20 lights. Each circuit can be programmed as continuous light, maintained light, switched maintained light or a staircase light. Maintained lights and emergency lights can be operated combined. This allows up to 640 emergency or safety lights to be supplied.

Type  Fusing  maximum Load    per module DCM42  4x F6,3A  4A / 2x 860 VA
The built-in web interface with visualization software allows to set up and monitoring the system and the connected lights very comfortable from any networked PC. The position of the installed luminaires can be shown on a stored building plan.

Up to 32 systems can be linked by TCP / IP. This allows a maximum of 1024 circuits and 20,480 luminaries to be connected and monitored by the whole system.

Case material:  steel-sheet RAL 7035

Protection category: IP20

Insulation class: I

Voltage:  3 x 230V AC (±10%) 50/60Hz

Output voltage:  216V

Permissible Temperature: 10°C to 35°C

Battery (not included):  Maintenance-free, closed lead   acid cell OGiV, OGi, OPzS or OPzV

Performance Data incl. 25% aging reserve:                                            1h                     3h

with 26 Ah battery                                                                       2.400 W            1.070 W

with 28 Ah battery                                                                       2.660 W            1.100 W

with 33 Ah battery                                                                       2.923 W            1.337 W

with 40 Ah battery                                                                       3.746 W            1.607 W

with 45 Ah battery                                                                        3.888 W           1.728 W

with 55 Ah battery                                                                        5.314 W           2.282 W

• Central power supply system according to DIN EN 50171 for safety lighting systems according to DIN EN 50172 and systems according to DIN VDE 0100-718
• automatic test facility according to DIN EN 62034
• Combined switching type for maintained, non-maintained and switched maintained light
• Service-friendly modular 19 “slide-in technology
• Electronic test book for recording all data over a period
of> 5 years
• multilingual menu navigation, e.g. German English
• Management and error display of up to 20 lights each circuit
• 32 circuits of max. 860 VA
• Maximum connected load (AC operation) of 7340 VA
• Status information of the system in plain text as well as status LEDs
• Interface for external modules SAM24, MC-LM, MCT15 via RS485BUS
• up to 6 switching inputs per circuit
• Networking of systems possible via Ethernet (TCP / IP)
• Web interface for visualization and configuration

Integrated light switch query module SAM:
• 8x switching input on terminal (200 - 255 V AC or 24 - 255 V DC) for switching the circuits in AC operation
• 3 circuit types (sw. maintained, maintained, non-maintained) programmable
Integrated IO module:
• 7x relay output, 230 V AC, 6 A / 30 V DC, 6A,
floating changeover contact
• 4x galvanically isolated switching input (200 - 255 V AC or 24 - 255 V DC), reverse polarity-tolerant, function programmable

Integrated CCIF - Critical Circuit Interface Module
· Monitoring of a potential-free network monitor loop
for interruption and termination of the line

MIDICONTROL PLUS – THE SIMPLE CENTRAL POWER SUPPLY SYSTEMS ENTRY

midiControl plus is a preconfigured central power supply system with single luminaire monitoring without additional wiring, free programmable circuits and a 5-year log book for connecting emergency and security luminaires with LED, fluorescent or halogen lamps. Available either with one or two chargers to 2.5A each. The biggest version equipped with 55 Ah batteries, outputs of 5300 W for 1 hour, 2300 W for 3 hours or 1000 W for 8 hours.

The circuit module supplies all connected luminaires to the system with electricity. Each outlet can be programmed for circuit monitored systems and for single luminaire monitoring. A combined operation is also possible. The midiControl plus can hold up to 16 circuit modules of types DCM42 for up to 32 current circuits.

Each module is designed for 2 output circuits, each with up to 20 lights. Each circuit can be programmed as continuous light, maintained light, switched maintained light or a staircase light. Maintained lights and emergency lights can be operated combined. This allows up to 640 emergency or safety lights to be supplied.

Type  Fusing  maximum Load    per module DCM42  4x F6,3A  4A / 2x 860 VA
The built-in web interface with visualization software allows to set up and monitoring the system and the connected lights very comfortable from any networked PC. The position of the installed luminaires can be shown on a stored building plan.

Up to 32 systems can be linked by TCP / IP. This allows a maximum of 1024 circuits and 20,480 luminaries to be connected and monitored by the whole system.

Case material:  steel-sheet RAL 7035

Protection category: IP20

Insulation class: I

Voltage:  3 x 230V AC (±10%) 50/60Hz

Output voltage:  216V

Permissible Temperature: 10°C to 35°C

Battery (not included):  Maintenance-free, closed lead   acid cell OGiV, OGi, OPzS or OPzV

Performance Data incl. 25% aging reserve:                                            1h                     3h

with 26 Ah battery                                                                       2.400 W            1.070 W

with 28 Ah battery                                                                       2.660 W            1.100 W

with 33 Ah battery                                                                       2.923 W            1.337 W

with 40 Ah battery                                                                       3.746 W            1.607 W

with 45 Ah battery                                                                        3.888 W           1.728 W

with 55 Ah battery                                                                        5.314 W           2.282 W

• Central power supply system according to DIN EN 50171 for safety lighting systems according to DIN EN 50172 and systems according to DIN VDE 0100-718
• automatic test facility according to DIN EN 62034
• Combined switching type for maintained, non-maintained and switched maintained light
• Service-friendly modular 19 “slide-in technology
• Electronic test book for recording all data over a period
of> 5 years
• multilingual menu navigation, e.g. German English
• Management and error display of up to 20 lights each circuit
• 32 circuits of max. 860 VA
• Maximum connected load (AC operation) of 7340 VA
• Status information of the system in plain text as well as status LEDs
• Interface for external modules SAM24, MC-LM, MCT15 via RS485BUS
• up to 6 switching inputs per circuit
• Networking of systems possible via Ethernet (TCP / IP)
• Web interface for visualization and configuration

Integrated light switch query module SAM:
• 8x switching input on terminal (200 - 255 V AC or 24 - 255 V DC) for switching the circuits in AC operation
• 3 circuit types (sw. maintained, maintained, non-maintained) programmable
Integrated IO module:
• 7x relay output, 230 V AC, 6 A / 30 V DC, 6A,
floating changeover contact
• 4x galvanically isolated switching input (200 - 255 V AC or 24 - 255 V DC), reverse polarity-tolerant, function programmable

Integrated CCIF - Critical Circuit Interface Module
· Monitoring of a potential-free network monitor loop
for interruption and termination of the line


No product available